1. Product introduction
The batching tank is open-up type, and has the functions of heating, automatic temperature control, heat preservation and stirring; fast heat transfer, large temperature difference, convenient cleaning and the like. Widely used in food (milk), pharmaceutical, daily chemical, beverage, oil, chemical, pigment and other industries as heating, mixing or sterilization. It is especially suitable for small and medium-scale use of units and research institutes without steam heat sources. A fully enclosed structure can be used according to the process requirements.
Three product structure and characteristics
1 main technical and structural properties: 1, volume: 50L, 100L, 200L, 300L, 500L, 600L, 1000L ~ 5000L.
2. Heating method: Insert the electric heating rod into the jacket, and heat evenly without cold zone. The heat transfer oil or water is injected into the jacket as a heating medium, and heat energy is generated to heat the material in the tank.
3, material heating temperature: ≤ 350 ° C; material heating time: 20min ~ 90min (depending on the process needs).
4. Temperature control: The temperature of the thermocouple is measured and connected with the temperature controller to measure and control the temperature (temperature difference ± ≤ 1 ° C), and the temperature of the material can be adjusted. The temperature controller is installed in the electric control box, and the temperature transfer rod is directly inserted into the bottom of the tank, so that the liquid can be used to the lowest position and the temperature can be indicated.
5. Tank body: The inner surface is mirror polished, and the roughness Ra≤0.4μm.
6. Upper cover: It is two openable movable cover, easy to clean, and the inner and outer surfaces are mirror polished (roughness Ra≤0.4μm).
7. Inner tank bottom structure: It is processed into the R angle by spinning, and there is no dead angle after welding and polishing with the inner tank body, and it is inclined at 5° to the discharge port, which is convenient for the material to be discharged without any retention.
8. Jacket form: Full jacket, used to add heat transfer oil or water to achieve the best temperature rise and temperature reduction during work.
9. Insulation material: foaming with pearl cotton, rock wool or polyurethane to maintain the temperature difference with the outside world to achieve thermal insulation effect.
10, the surface treatment of the outer shell: mirror polishing or 2B primary color matt or 2B matte surface matt treatment.
11. Stirring device: The top center is stirred, and the output shaft of the reducer and the stirring paddle shaft are connected by a looper for easy disassembly and cleaning.
12, stirring speed: 15 ~ 120r / min (fixed speed); stirring paddle form: frame type, anchor type, paddle type, turbine type, etc. (according to process requirements).
13. Equipment configuration: electrical control box, temperature meter, feed liquid inlet and outlet, medium import and export (inlet and drain), vent (oil spill), etc.
14. Material: inner tank SUS304 or SUS316L; jacket is Q235-B or SUS304; outer protective casing is SUS304.
15. The process opening of each inlet and outlet nozzle and the welding of the inner tank body adopt the arc-transition process arc transition, which is smooth and easy to clean without dead angle and beautiful appearance.
2. Specifications
|
Product number: |
DB-008 |
|
Operating Voltage: |
380V |
|
structure type: |
Open |
|
product weight: |
248KG |
|
Product current: |
45A |
|
set tempreture: |
100℃ |
|
Product volume: |
1000L |
|
Stirring speed: |
60-80（n/min） |
|
Liner work pressure: |
Atmospheric pressure |
|
Total product height: |
2.4m |
|
Motor Power: |
3KW |
|
Electric heating power: |
12KW*2 |
|
Mezzanine working pressure: |
Atmospheric pressure |
