1. Putty powder mortar single piece production equipment working principle:
The putty powder mortar equipment moves with the spiral belt of the stirring shaft with high efficiency and fast mixing, so that the inner and outer spiral belts turn the animal material in a wide range, the inner spiral belt moves the material to both sides, and the outer spiral belt moves the materials from both sides. The inward movement causes the material to be blended back and forth, and the other material is pushed by the spiral belt to move radially along the axial direction to form a convective cycle. Due to the agitation of the above motion, the material is quickly and uniformly mixed in a short period of time.
2. The structure characteristics of the single piece production equipment of putty powder mortar:
The machine is a horizontal cylinder, and the inner and outer three-layer spiral belt has a unique structure, stable operation, reliable quality, low noise, long service life, convenient installation, and a variety of agitator structures, and a wide range of multifunctional mixing equipment.
The mixing speed is fast, the mixing uniformity is high, especially the viscosity, and the squeegee can be installed on the spiral belt, which is more suitable for the mixing of thick and paste.
Under the mixing requirements of different materials (special materials must be cleaned after each mixing), different spiral belt structure can be used to heat and dry the jacket type.
The horizontal body can also be provided with a movable door for the user to clean.
3. Putty powder mortar single piece production equipment scope of application:
Putty powder mortar single piece production equipment has introduced foreign technical data, and the company's professional and technical personnel digest innovative design results, is a new type of high-efficiency mixing equipment, widely used in chemical, pharmaceutical, food, compound fertilizer, health care products, dyes, pigments , rubber, building materials, refractory materials, rare earths, plastic glass and new materials, nuclear energy materials and other industries, solid-solid (that is, powder and powder), solid-paste (that is, powder in the glue) materials.
2. Specifications
|
Equipment model |
Model /kg |
Main motor /kw |
Lift motor /kw |
Transmission model |
Mixing drum volume /m³ |
Spindle speed |
|
|
Gearbox |
Cycloidal needle |
||||||
|
DB-0.5 |
500 |
5.5 |
3 |
ZQ250 |
XWD5 |
0.83 |
24 |
|
DB-1.0 |
1000 |
7.5 |
3 |
ZQ350 |
XWD7 |
1.65 |
24 |
|
DB-1.5 |
1500 |
11 |
4 |
ZQ400 |
XWD8 |
2.28 |
24 |
|
DB-2.0 |
2000 |
11 |
4 |
ZQ400 |
XWD8 |
2.48 |
24 |
|
DB-3.0 |
3000 |
15 |
4 |
ZQ500 |
XWD9 |
4 |
24 |
|
DB-5.0 |
5000 |
30 |
4 |
ZQ650 |
XWD10 |
5 |
|
