1. Product introduction
Features
This system is made of PLC programmable controller, safe and reliable!
Filling head, quick and easy connection between the inlet and outlet pipes, easy to remove and wash!
With two-stage automatic filling method, the accuracy is high!
When the filling head is not inserted into the bucket, the gun is automatically lifted when it touches the barrel mouth!
When the filling target value is reached, the filling head automatically closes and rises!
Net weight / gross weight two filling methods are free to choose!
The filling target is freely set, and 20 sets of recipes can be stored to facilitate various weight filling!
The operation is simple and easy to learn, one-button filling, and manual operation mode, automatic control of the feeding system to ensure safety!
Automatically determine the tare weight range and no bucket no filling function!
The unique drip cup and gas collecting hood design can effectively reduce the impact of dripping and exhaust gas on the environment!
Fast filling speed and wide application range
The filling head can be single or double head, piston type working, high filling speed, cost saving, reduce the working pressure of workers; can fit round, square, flat and various caliber filling, unique valve body structure, Achieve the use of paste, glue and liquid.
Easy to operate and easy to maintain
Foot switch operation, convenient, practical, easy to adjust the filling volume, quick and easy to disassemble and clean, can be completed by one person, equipped with all imported components, the quality is stable and reliable.
High filling accuracy
The metering structure adopts the plunger method, the filling amount is accurate, and the measurement error is less than ±1%.
Excellent environmental indicators and safety
Fully pneumatically controlled to meet explosion protection requirements.
Material viscosity: ≤100,000cps
Production capacity: 5-1,000 ml
Application: Suitable for coatings, paints, inks, adhesives, curing agents, organic solvents, daily chemicals, detergents, pesticides, pharmaceuticals, lubricants, edible oils and various fluid filling.
Applicable materials: material viscosity below 100,000 cps, liquid material and slurry with fluidity; such as edible oil, latex paint, color paste, industrial paint, curing agent, organic solvent, water-based ink, pesticide suspension agent, adhesive, More than a thousand kinds of materials such as detergent.
2. Specifications
|
Model
|
Filling volume
|
Filling speed
|
Filling error
|
Gas source
|
|
CGZ15
|
≤12
|
3-8tank /min
|
±2％
|
0.5mpa
|
|
CGZ15
|
≤12
|
3-8tank /min
|
±2％
|
0.5mpa
|
|
CGZ75
|
≤75
|
3-8tank /min
|
±2％
|
0.5mpa
|
|
CGZ150
|
≤150
|
3-8tank /min
|
±2％
|
0.5mpa
|
|
CGZ300
|
≤300
|
3-8tank /min
|
±2％
|
0.5mpa
|
|
CGZ500
|
≤500
|
3-8tank /min
|
±2％
|
0.5mpa
|
