1. Product introduction
The sand mill is the most widely used, most advanced and most efficient grinding equipment. The grinding chamber is the narrowest, the gap between the levers is the smallest, the grinding energy is the most dense, and the high-performance cooling system and automatic control system can realize continuous material. Continuous processing of the material greatly improves the production efficiency.
The sand mill, also known as the bead mill, is mainly used for wet grinding of chemical liquid products. According to the performance, it can be roughly divided into horizontal sand mill, basket sand mill, vertical sand mill and so on. It is mainly composed of the body, the grinding cylinder, the sanding disc (the lever), the grinding medium, the motor and the feeding pump. The feeding speed is controlled by the feeding pump. The grinding media of the device are generally classified into zirconia beads, glass beads, zirconium silicate beads, and the like.
Compared with grinding equipment such as ball mill, roller mill and colloid mill, horizontal sand mill has the advantages of high production efficiency, strong continuity, low cost and high product fineness. The process conditions vary greatly, and the fineness requirements can be adjusted and classified by adding and subtracting grinding media.
Horizontal sander features:
Simple design, easy operation, long service life, low maintenance cost, wide application industry
Adapt to continuous or batch production, fully enclosed structure, less solvent evaporation
Unique dynamic separation, gap dynamic separation, centrifugal separation, a variety of bead separation options
Temperature, pressure, shaft seal liquid automatic protection device, safer to use
Imported mechanical seal, perfluoro rubber seal, stable and reliable operation
Inner tube set structure, easy to replace, can be replaced on site
Available in both straight and tapered versions, the conical vane sander is suitable for grinding of higher viscosity materials.
The whole frame of the rack is folded, the equipment runs more stably and has a long service life.
2. Specifications
|
Model |
|
WS15 |
WS20 |
WS30 |
|
Dimensions SIZE |
A |
1300 |
1680 |
1860 |
|
B |
1800 |
2300 |
2500 |
|
|
C |
650 |
650 |
700 |
|
|
D |
790 |
790 |
840 |
|
|
E |
1400 |
1400 |
1540 |
|
|
Effectivevolume |
L |
15 |
20 |
30 |
|
Main motor power |
KW |
15 |
18.5 |
22 |
|
Abrasive medium loading |
L |
12.5 |
17 |
25.5 |
|
Material viscosity |
Pa.s
|
|
10
|
|
|
Cooling water excess |
m/h |
2 |
３ |
|
|
Throughput |
kg/h |
30-300 |
50-500 |
70-700 |
